Mon - Sat, 7:30am - 7:30pm

Sales & Support- service@mechnician.com

Jaltest MHE Diagnostic Software – The Ultimate Tool For Troubleshooting

Jaltest MHE Diagnostic Software – The Ultimate Tool For Troubleshooting

MHE or Material Handling Equipment refers broadly to a wide range of machines that are used to move, store, and control materials and products during manufacturing and distribution processes. They are used to handle products during a part of their life cycle, from loading and unloading to storage and transportation.

Equipment that falls into this category includes forklifts, conveyors, cranes, hoists, automated guided vehicles (AGVs), and more. They are used in several industries including manufacturing, warehousing, retail, construction, and logistics.

Jaltest Material Handling Diagnostic Tool Kit MHE

If you have a fleet of Material Handling Equipment, your goal would be to ensure that they are regularly on the job without downtime and that you do not face any logistical nightmares. For this, you need the Jaltest MHE diagnostic tool that identifies any minor problem with your equipment through fault codes and troubleshoots them if they become a major issue that might lead to downtime.

Now, what are fault codes that are tracked by our Jaltest MHE diagnostic software? 

Every modern vehicle and material handling or construction equipment has an onboard computer (OBD) known as the Engine Control Unit (ECU). It continuously tracks and monitors all systems and components and in case of any malfunction, sends out warning signals in alpha-numeric format called fault codes or Diagnostic Trouble Codes (DTCs). 

These are seen on the display screen of the OBD, generally tucked away below the dashboard. Whenever a fault code appears, connect our Jaltest material handling diagnostic tool to the OBD and get the interpretation of the code, know what is wrong with the equipment, and be guided through rectification solutions. Your MHE will soon be back on the job again through resolutions that are no less than what is offered by dealers or service engineers.

Yale Material Handling Equipment Diagnostic Software interface for advanced diagnostics and maintenance support

So far as the Jaltest forklift troubleshooting tool is concerned, it is good for a wide range of make and models of equipment. You can carry out several diagnostic and maintenance processes, from simple to complex activities on well-known brands of forklifts such as Caterpillar, Toyota, Hyster, Yale, and more. Further, our tool works equally well for all forklift brands regardless of the propulsion mode – diesel, electric, or LPG.

What makes our Jaltest material handling scan tool a leader in this niche is the cutting-edge features that are incorporated into it. You get a user-friendly diagnostic menu that handholds you through resolutions for any issue, helped along by live technical and maintenance information provided in real-time once you connect the software to the OBD of your material handling equipment. Moreover, you get detailed wiring diagrams for all systems and components, helping you to locate the faults for easy diagnosis.   

Need help with your Material Handling Equipment?

Click Here

Technical Information About The Jaltest Forklift Diagnostic Tool 

Forklifts are the workhorse of material handling equipment and the Jaltest material handling scan tool greatly focuses on this piece of equipment. It provides important and critical information about the health of your forklifts that helps you to take quick action through the Jaltest MHE troubleshooting scan tool. 

You get a host of data while diagnosing the state of your forklifts. This includes information about high engine coolant temperature, very low injection rail pressure, or whether the injector cylinder resistance value is out of range. Data at this level was previously available at the dealer-level only. 

Jaltest Maintenance Tool for calibration and setting of Hyster equipment material handling diagnostic software

Other technical data that you get is linked to maintenance activities carried out on various systems. You can set mast parameters, read fault codes, scan control levers for any issues, and check steering sensors. You can also actuate components that include the mast raising solenoid valve, the mast tilt control solenoid valve, the swing lock solenoid valve, and others.

In short, our Jaltest MHE tool provides all information and problem solutions that keep your forklifts in peak performance mode through live data obtained from their onboard computers. The Jaltest tool ensures that any fault-clearing activity is done directly from the diagnostic menu, making for a seamless experience. 

However, to use the Jaltest forklift maintenance tool to its optimum capability and get the maximum service from it, you need to use the password of your forklift. You should access the forklift service password menu, reset the master factory password, and get the required password code. Once this is received, others should be allowed access to it only on a need-to-know basis so that your forklift operations are secure.          

Read more about forklift fault codes here. 

Clearing Fault Codes With The Jaltest MHE Troubleshooting Tool

With our Jaltest MHE diagnostic software, troubleshooting faults is a seamless activity. Our tool provides two options, namely “full system scans” and “scanning by symptoms”. 

In the first instance, you can carry out scans at fixed periods as a part of maintenance activity. Any temporary fault codes will be detected and swift action taken through the Jaltest tool before they become a major issue. Usually, these types of fault codes get cleared automatically in a few driving cycles but if not, “scanning by symptoms” has to be initiated.

Toyota forklift diagnostic tool software with advanced features for material handling companies' equipment management

This is usually a more serious issue and might require complex fault clearance processes. Here, our Jaltest material handling diagnostic scanner guides users through a user-friendly menu to quickly understand the fault by the symptoms and take corrective action. 

Now let us understand how fault codes are cleared with our Jaltest material handling diagnostic software. 

First, turn the ignition to ON but do not switch on the engine. The display panel of the OBD computer will be powered on and the fault code related to a malfunction will be shown on the screen. Now, connect the Jaltest MHE diagnostic tool to the onboard computer and the fault code will be shown on the software laptop along with the actions required to clear it.

This process is regardless of whether you are using the Jaltest forklift or lift truck diagnostic tool (it holds good for any other material handling equipment too). The benefit here is that you do not have to wait for certified engineers to turn up and can get your material handling equipment back on the job sooner as the resolutions are done on the premises only.

If you are troubleshooting the diesel engines of your MHE, combine the Cojali diagnostic tool with the Jaltest software for excellent results.

Material Handling Equipment Diagnostic Tool for advanced fault detection, maintenance, and repair of material handling machinery

Jaltest Forklift Diagnostic Tool and Forced Regens

Whenever a fault code is registered that is related to the engine of your forklift or any other material handling equipment, extra caution must be exercised and immediate action should be taken to clear it. One of the complex fault-clearing actions that is specific to diesel engines is forced regens. 

Every diesel engine has a Diesel Particulate Filter (DPF) that traps soot and particulate matter from emission gasses before they are released, making for a cleaner environment. When engines run continuously at high speeds this excess soot buildup is burned off. However, at lower speeds and in stop-go-stop work as in forklifts and other material handling equipment, the soot is retained in the DPF, requiring forced regens to be carried out.

CAT forklift diagnostics screen displaying live data for vehicle performance and maintenance insights

When the DPF is clogged, extra pressure is put on the engine, reducing its performance and efficiency. In worst cases, the equipment might go into limp mode. If the fault code related to this malfunction shows up on the OBD, connect the Jaltest MHE diagnostic software to the equipment and follow the instructions. 

Forced regens usually entail running the engine at high rev for around 40 minutes. The increase in temperature of the emission gasses burns away the soot buildup. 

Summing Up

Our Jaltest MHE scanning software is an optimized tool that keeps your fleet of material handling equipment in high operating mode without downtime. It is a user-friendly tool and unlike other software in this niche, does not require any elaborate configuration or setup procedures. Simply download the software, connect with the OBD of your MHE and you are ready for fault-clearing activities. 

We also issue three updates to our software every year to ensure that it is in sync with technological innovations made by brands to their material handling equipment.


Leave a comment

Please note, comments must be approved before they are published

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


New Jaltest Diagnostics 25.2 Version Is Here!

New Jaltest Diagnostics 25.2 Version Is Here!

We’re excited to announce that Jaltest Diagnostics Version 25.2 is now available! As always, Jaltest by Cojali continues to raise the bar in multi-brand diagnostics, and this latest update brings even more power, speed, and vehicle coverage to your fingertips.

Whether you're a diesel technician, fleet operator, or workshop owner, the 25.2 update is packed with features that improve usability, efficiency, and diagnostic capabilities.

What’s New in Jaltest 25.2?

Cojali has delivered a strong update with significant improvements and enhancements, including:

Expanded Vehicle Coverage

  • New brands and models added across Commercial Vehicles, Agricultural Machinery, Construction Equipment, Material Handling, and Marine.
  • Improved connectivity and deeper diagnostics for popular makes and models, enhancing repair processes.

Updated Technical Information

  • More detailed system diagrams, fuse/relay information, and guided troubleshooting.
  • Enhanced repair times and service data to streamline your workflow.

Improved User Experience

  • Optimized interface for quicker access to commonly used functions.
  • Smoother navigation between modules and control units.

Advanced Diagnostics Features

  • Enhanced bi-directional tests for engine, transmission, ABS, and more.
  • Additional calibrations and parameter configurations now available.

Should You Upgrade to Jaltest 25.2?

Absolutely. Staying up-to-date with the latest Jaltest version ensures:

  • Access to new systems and protocols
  • Faster and more accurate diagnostics
  • Compatibility with newer vehicles and machines
  • Continued technical support and updates from Cojali

How to Get the 25.2 Update

If you're already a Jaltest user with an active license, updating to version 25.2 is quick and easy via the Jaltest platform. Not using Jaltest yet? This is the perfect time to make the switch and experience the industry’s most complete diagnostics tool.

Would you like to learn more or need assistance with your update? Contact the Jaltest support team (1-800-975-1865) and explore our Jaltest Diagnostics Tool kits today.

Download the document and be the first one to learn about them

Need assistance updating or do you have other questions? Contact Jaltest support at +1 (305) 960-7651 or toll-free +1 (800) 975-1865 or customersupport@jaltest.com

Not yet part of the Jaltest family?

Get started with a free demo and experience the difference for yourself!

 REQUEST A CUSTOM DEMO VIDEO     CONTACT US (888) 624-2240

The Jaltest Marine Diagnostic Software – An All-Inclusive Review

The Jaltest Marine Diagnostic Software – An All-Inclusive Review

While opening this review on the Jaltest marine diagnostic software, the first question that will pop up in the reader’s mind is whether this tool is optimized for inboard or outboard marine engines. Hence, the connection between marine engines in general and the Jaltest marine motor diagnostic tool will be dealt with first. 

Marine motors are complex systems and require a great deal of attention if you want them to run at peak efficiency and not get stranded on the high seas at any time. Periodical checks with our Jaltest marine diagnostic tool will ensure that any minor issue is identified quickly and resolved before it becomes a major issue. 

Marine Diagnostic Tool Kit with Marine License

Inboard marine engines are fitted inside the hull of the vessel in large boats and yachts. Outboard engines are installed externally on the transom and are seen in small boats. When you see a jet ski whiz past you, that is an outboard engine

The way in which our Jaltest marine scan tool reads the data is different for the two types of engines too. For inboard engines, the Jaltest marine scanner is connected to the motor via a cable while for outboard engines the connection is established wirelessly over Bluetooth or Wi-Fi. Apart from this aspect, the diagnosis and maintenance of engine health are almost the same as the Jaltest tool.       

Need help with your Marine Motor and Engine?

Click Here

Jaltest Marine Code Reader and Cutting-Edge Diagnostics

How does our Jaltest marine code reader work? To understand it better, a brief look at what is a fault code is necessary. 

All modern marine vehicles, equipment, or vessels have an onboard computer that continuously tracks the health of the systems and components. Whenever a malfunction occurs, it is flashed on the display of the onboard computer as fault codes, typically in alpha-numeric format. 

Marine diagnostic tools for engine troubleshooting, featuring a handheld device with a digital display and buttons

At this point, you must connect the Jaltest marine code reader to the marine motor to interpret the fault code, identify what is wrong, and be guided on the fastest rectification to get your boat on the move again. The capabilities of the Jaltest marine software will be discussed later in this post. 

Here are some examples of marine fault codes, also known as Diagnostic Trouble Codes (DTCs). However, fault codes are specific to the make and models of marine engines and the following is of Volvo Penta marine engines.   

  • Coolant Temperature (Code 6.1, PID/SPN 110): Caused when the coolant temperature is too high.
  • Oil Pressure (Code 6.6, PID/SPN 100): Caused when the oil pressure is too low.
  • Piston Cooling Pressure (Code 6.7, PPID 8/SPN 520192): Caused when piston cooling pressure is too low.
  • Battery Voltage, CIU (Code 6.9, PID/SPN 158): Caused either when there is a short circuit to negative, a faulty alternator, or a faulty battery/battery cable.
  • Crankcase Ventilation Pressure (Code 7.7, PID/SPN 153): Crankcase ventilation pressure is too high.
  • Injection Pressure (Code 8.3, PID/SPN 164): Caused by either fault in the fuel pump, fuel supply, harness, or sensor.
  • Pressure Valve (Code 8.3, PSID 97/SPN 679): Caused by leakage in the pressure release valve, the pressure release valve being stuck in an open position or being stuck in a closed position.
  • Preheating Sensor (Code 8.6, SID 70/SPN 729): Caused by either a fault in the cable harness or in the preheating relay.

Once the fault code is seen and the onboard computer is linked to our Jaltest marine diagnostic software, the resolution process begins. Since fault codes are brand and model-specific, this is the first thing that you have to input in the software. 

Our maintenance tool then takes over and helps you to navigate the resolution procedure. You will get live technical data and information in real time so that you are updated about the issue. Further, we offer detailed wiring diagrams of systems and components so that you know the precise location of the fault and the exact nature of the malfunction.

Fine-tune your marine engine with advanced Marine Engine Diagnostic Software for optimal performance and maintenance

It is advisable to do a preliminary check of outboard engines before using our Jaltest marine maintenance tool. Often, temporary fault codes crop up that do not require complex solutions but a cursory check of the engine only. Change filters and fluids periodically to thwart any possible future problems and verify for any rust on metal components that might show up as a fault code related to electrical issues.

The Jaltest marine diagnostic tool offers deep coverage maintenance of inboard and outboard marine engines of all leading makes such as Volvo Penta, Indmar, and more. Even though our software works equally well for petrol and diesel engines, it is the latter version that is more in demand.         

Among the outboard marine motor systems that are provided deep coverage by our Jaltest marine scan tool are the electronic modules, engines, helm, powertrain, steering, and more. Technically advanced activities include calibrating trim and control levers, carrying out cylinder cut-out tests, and setting parameters. 

Additionally, all testing data is recorded by the software at a very fast 90 minutes for 24 measurements. Our Jaltest marine maintenance tool provides comprehensive system checks and diagnostics such as cylinder balance tests, advanced data graphing, and compression tests.

Jaltest marine diagnostic software interface for boat diagnostics and repair, featuring detailed system analysis tools

What gives our Jaltest marine diagnostic tool an edge over others in this niche is the user-friendly diagnostic menu that handholds users through every aspect of marine engine troubleshooting. Through live data about a malfunction, the point of a fault can be quickly traced and corrective action taken.  

From the diagnostic menu, you can directly choose a specific metric for fault rectification that includes the engine, electronic module, instrument cluster, powertrain, steering, and more. Any one parameter can be selected for fault clearance or all of them can be scanned through full system scans to find any fault at source and clearing it before it leads to a breakdown. 

Our Jaltest marine software helps boat owners carry out several technically advanced activities. They can adjust the trim, set up key parameters, adjust idle speeds for fuel efficiency, and use code injectors to quickly increase performance. With such thorough checks, you not only can rectify fault codes whenever they arise but can also carry out preventive maintenance to pre-empt future issues, ensuring the top performance of your marine vessel.  

Read more about diagnostic software for marine engines. 

Marine Calibration with Jaltest Marine Diagnostic Software

Marine vessels have intricate systems and instruments that allow precise navigation, safety, and an unbroken chain of communication. These are critical when you are miles out at sea. However, set parameters of these aids often drift out of required tolerances due to environmental and temperature changes, humidity, and wear and tear. 

With our Jaltest marine maintenance tool, you can calibrate your instruments to ensure that they are within the range required for safe navigation. There are several types of calibration services that you will get from our maintenance tool.

Jaltest Marine Diagnostic Software interface displaying detailed boat diagnostics on a digital screen

The first is on-site calibration where you calibrate equipment and instruments directly on the vessel with the Jaltest marine software. This process ensures that you can carry out calibration while you are on the move and do not have to wait for dealer-level certified service engineers to come abroad. You can thus maintain valid certification of equipment without a break.

The second is the calibration of gas supply that tests and calibrates gas detection instruments where suppliers offer several options of flow rates and gas mixtures that are customized for the maritime industry. It helps to get accurate calibration of multi-gas detectors. 

Finally, the incorporation of innovative and technologically advanced features into equipment meant for calibration has led to automated and superior equipment calibration services. You can monitor the health of the systems and components of the vessel remotely and carry out calibration activities from the shore.

Marine diagnostic tool displayed on a table, featuring a digital screen and various connectors for troubleshooting

Summing Up

Our Jaltest marine diagnostic and maintenance software is optimized for cutting-edge diagnosis of marine equipment. Connect to the onboard computer and carry out optimized activities to keep your boat working at top operating efficiency. 

Our user-friendly Jaltest marine software can be easily downloaded onto your laptop without any elaborate configuration or setup procedures. Simply plug into the onboard computer and you are ready for fault clearance and troubleshooting. 
We also offer three updates to our software every year to keep in sync with innovations in marine equipment.

New Jaltest Diagnostics 25.1 version is Here!

New Jaltest Diagnostics 25.1 version is Here!

We're thrilled at Mechnician to introduce Jaltest Diagnostics 25.1, the newest, most sophisticated iteration of our highly acclaimed multi-brand diagnostic tool. We're your go-to Jaltest dealer, here to make sure you know all about what this top-notch update has in store for your workshop.

What's new in Jaltest 25.1

The 25.1 update revolves around user experience, compatibility, and efficiency. Here’s what to look forward to:

  • New, intuitive interface to facilitate easier navigation
  • Broader coverage of newer vehicle makes and designs
  • Improved diagnostic functions on various systems and brands
  • Enhanced technical data, directed diagnostics, and troubleshooting steps

Whether you are performing commercial vehicle, farm equipment, or construction equipment work, this update guarantees you've got access to new tools and information.

Ready to Upgrade?

You don't have to miss out on Jaltest Diagnostics 25.1's complete potential.

You will get notified after May 1 in your software when it is time for you to update.  
If you need assistance updating please call tech support 1-800-975-1865

Download the official update document here to see all new features and improvements.

Download the document and be the first one to learn about them

Need assistance updating or do you have other questions? Contact Jaltest support at 1-800 975-1865 or  customersupport@jaltest.com

Not yet part of the Jaltest family?

Get started with a free demo and experience the difference for yourself!


REQUEST A CUSTOM DEMO VIDEO   CONTACT US (888) 624-2240

Why Do You Need A Semi-Truck Scan Tool

Why Do You Need A Semi-Truck Scan Tool

In this post, we will explore the various intricacies and capabilities of the Jaltest semi-truck scan tool as well as the commercial and medium-duty truck scanner and diagnostic tool.  

But first, what is the difference between a semi-truck, and others such as heavy-duty, medium-duty, and light commercial trucks?

Jaltest CV Commercial Vehicles Diagnostic Kit

A commercial truck or a medium-duty truck is a straight truck with the whole vehicle resting on a single chassis. A semi-truck, on the other hand, has two distinct parts, the cab and the trailer connected via a fifth wheel. The straight truck is easier to handle than a semi-truck due to its single chassis. 

However, though driving a semi-truck requires greater driver expertise, it is more versatile as it can carry loads not only heavier than straight trucks but of various configurations also as the load rests on an open trailer and is not boxed in. The initial investment on semi-trucks is substantially higher than on straight trucks but this is more than made up by higher load-carrying capacity per trip. 

Functions of The Jaltest Commercial Truck Scanner  

Our Jaltest commercial truck diagnostic tool is optimized for over 100 makes of semi-trucks and trucks. These include Kenworth, Paccar, Mack, Freightliner, Allison, Peterbilt, Cummins, Detroit, Bendix, Volvo, International, and more. Hence, the benefit here is that with one software, you can diagnose a mixed fleet of trucks without the need to invest in various diagnostic tools. 

The Jaltest commercial and semi-truck diagnostic software allows you to perform maintenance activities and undertake resolutions to complex issues. Hence, not only can you ensure that any minor malfunction is quickly solved before it becomes a major issue but can also troubleshoot problems with all major systems and components such as the engines, brakes, hydraulics, transmissions, body computers, and more. 

Hino USA Fault Code displayed using Jaltest Commercial Vehicle Diagnostic Software for accurate truck diagnostics and repair

Our Jaltest semi-truck diagnostic software identifies the fault codes of the vehicle, interprets them, and carries out resolutions that are no less than dealer-level servicing. Since problem identification and resolutions are done on the premises instead of waiting for the dealer’s certified engineers, precious time is saved in getting the truck back on the road again.    

It is essential here to elaborate on what are fault codes. It is mandated by law that all vehicles, construction, material handling equipment, and farm machinery must have an onboard computer called the Electronic Control Unit (ECU). It tracks and monitors the various electronic systems and components and the overall health of the vehicle. Whenever a problem arises, it is shown on the display screen of the onboard computer as a fault code.

Our semi-truck computer scanner works through sensors placed throughout the vehicle. These process the data in the software and then send output signals to actuators that perform set actions. The warnings are sent as fault codes, generally in alpha-numeric format, and are seen on the onboard computer display panel placed below the dashboard on the driver’s side. 

Whenever a fault code is seen, connect our semi-truck scan tool to the onboard computer. It will read the fault code, interpret it, and recommend corrective solutions. Temporary fault codes generally go away within a few driving cycles but if they persist, the software will handhold you through more complex solutions till the fault codes are cleared. 

Need help with your commercial truck and semi-trucks?

Click Here

Cutting-Edge Capabilities of Jaltest Commercial And Semi-Truck Scan Tool 

When you use the Jaltest commercial truck diagnostic scanner there are several options that make sure that all systems and components come under the ambit of fault code clearance. When the warning lights start flashing on the onboard computer screen, connect our semi-truck scan tool to check the fault code, what it stands for, and how to resolve the malfunction. You need to scan by symptoms to understand what the fault is and how to rectify it at the earliest possible time.

Jaltest Commercial and Heavy-Duty Truck Fault Codes image showing detailed diagnostics for trucks and commercial vehicles

Once you go for fault code clearing, you will be offered a host of solutions such as maintenance data, vehicle data, injector coding, VGT (Variable Geometry Turbocharger), and more. This data can be monitored live in real-time so that you get updated information about the health of the vehicle and the precise nature of the fault. You will also be advised on the mode of dealing with faulty components and whether they should be replaced or repaired. 

Our Jaltest commercial truck scanner has an edge over others in this niche and is a cut above our competitors primarily because of the large range of functions embedded in the software. For example, you can actuate body components, calibrate VGT and code injectors, calibrate transmissions, get wiring diagrams, technical information, component replacement instructions, repair times, and more.

Moreover, you can calibrate systems and set parameters to get the best performance from your vehicle under specific running conditions. All trucks, whatever their capacity or configuration have systems calibrated and parameters set during manufacture to perform under standard driving conditions. 

Freightliner diagnostic software tool for vehicle analysis, providing accurate scanning and troubleshooting featuresic software

However, your truck might need to run under completely different conditions, and hence you need to alter the settings to get the most out of your vehicle. Under these circumstances, our semi-truck scan tool has a critical role to play. You can configure systems and set parameters for engines, hydraulics, transmissions, and more to get optimized performance from your vehicle. 

You can bank on the Jaltest commercial truck diagnostic scanner for resolving any issue, starting from simple jobs like fixing a loose wire to more complex tasks such as forced regens. 

Read more about commercial truck diagnostic software. 

Forced Regens and Jaltest Commercial Truck Diagnostic Tool

It is mandated by law that all diesel engines have a Diesel Particulate Filter (DPF) through which emission gasses are passed and released from the vehicle. The DPF captures soot and particulate matter and the cleaned gas is put out. However, if the truck does not run at high speeds, soot will accumulate in the DPF as the temperature of the exhaust gasses is not sufficient to burn away the soot.

This results in the DPF getting clogged with soot and particulate matter, thereby lowering the running efficiency of the truck. Drivers need to rev the engine more to get power from the engine leading to lower fuel efficiency and added stress on the engine.

Truck forced regens process illustrated with truck engine and exhaust system showing regeneration cycle in action

When passive regens are incapable of keeping the DPF clean, forced regens must be taken up. You will be guided in this activity by the Jaltest semi-truck diagnostic software and you have to simply follow the instructions in the software. 

Forced regens entail running the engine on high rev for about 40 minutes, an action that raises the temperature of the exhaust gas and burns away the accumulated soot. You will be handheld by our diagnostic tool and informed about the rev of the engine required ranging from High to Very High and the duration that it has to be run.

Forced regens is a very critical activity in the maintenance of diesel engines as left unattended, soot buildup might cause the engine to seize up and go into limp mode in extreme cases. 

Upgrade your Commercial Vehicle Diagnostic Tool for advanced fault detection, maintenance, and repair of trucks and fleet vehicles

Features Of The Updated Version Of Jaltest Truck Diagnostic Tool  

The latest version of our Jaltest semi-truck scan tool has several cutting-edge features that make it a leader in this field. It is also in sync with the technical innovations constantly being made to the systems and components of commercial trucks.

Here are some examples of the advanced capabilities introduced in our commercial truck diagnostic software.       

  • Displays the battery voltage and configures the fault code display during the system scan function
  • Restarts the connection when communication is lost with systems in different sections of the application
  • Configures measurement groups in the data recorder function. 

This makes the Jaltest Commercial and semi-truck scan tool a powerful medium to keep your trucks on the road without breakdowns. 

Summing Up 

For fleet owners of commercial trucks of any category, our Jaltest maintenance software is a must-have. Carry out various functions to ensure optimum performance and efficiency. Our software is easy to download and does not require any elaborate configuration or setup process. Simply download the software to your laptop, plug it into the onboard computer and you are good to start fault code analysis and rectification.

Back to News
Jaltest MHE Diagnostic Software – The Ultimate Tool For Troubleshooting